Blade 30W LED Surface Mounted Light

Model Number: Blade 30W Categories: , ,
The Blade is the way forward in slimline surface mounted fittings. The LED is not only better for your energy efficiency but the slimline look is modern and practical lighting for those areas needing that little extra light ie the kitchen, the study.
Clear
Product Enquiry
  • 3 year replacement warranty
  • Easy installation
  • Terminal block connection conveniently located in the centre of the fitting
Light Type
LED
Power
30W
Light Colour
Available in 3000K warm white and 5000K cool white
Lumen
Warm white - 2500lm /// Cool white - 2550lm
Dimmable
No
Installation Location
Indoor Only
Size (mm)
L 900mm x H 75mm
Warranty Period

3 year replacement warranty

How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz.

The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops.

People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.

 

Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.