- 3 year In home warranty
- Anti-rust die-cast aluminium body
- 3 speed wall control with light switch
- Fully reversible for summer & winter use
- Dimmable 24W CCT LED light switchable (3000k, 4000k or 5000k)
- Powerful & efficient 69W motor
Lifestyle 52″ Ceiling Fan With 24W CCT LED Light
The Lifestyle 24W LED CCT is simple yet elegant and extremely functional. It features a dimmabe 24W CCT (switchable 3000k, 4000k or 5000k) LED light and is available with a 1300mm (52") blade diameter. Made from a full die cast aluminium housing, the simplicity of the fan does not sacrifice its performance or reliability. The fan comes in simplistic White finish, a modern Brushed Aluminium finish, or a stylish Matt Black finish.
Rotational Diameter
52" (1300mm)
Blade Material
Sealed solid plywood
Blade Pitch
12.5°
Motor Wattage
69W
Controller Type
3 speed wall control with light switch
Summer / Winter Reverse
Yes
Installation Location
Indoor only
Speed
1 Speed | 2 Speed | 3 Speed
Current
0.293/0.279 I 0.2 I 0.138
Power
69w I 30w I 14.6w
Light Type
24W LED
Light Colour
CCT (3000K / 4000K / 5000K)
Lumen
3000K - 1650lm | 4000K - 1700lm | 5000K - 1750lm
Dimmable
Yes
Warranty Period
3 year In home warranty
Warranty Application Form
The below documents are required to apply for a warranty claim for your Martec product. These documents can be submitted at the end of the below form.
1. A copy of the Installation Receipt OR Tax Invoice OR Certificate of Compliance for the installation of the Martec product from the installing electrician.
2. Copy of the Purchase Receipt/Tax Invoice
3. The below form completed in full with as much detail as possible. Please also include pictures of the products if possible.
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz.
The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops.
People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
