- 3 year replacement warranty
- Anti glare refflector
Slip Square LED Steplight
The Slip 3.6w recessed LED step light is an energy efficient modern fitting that provides a simple, yet elegant solution for low level lighting. Perfect for providing directional light along a staircase or hallway. The Slip is available in both square and rectangular fittings.
Light Type
LED
Power
3.6W
Light Colour
Available in 3000K warm white and 5000K cool white
CRI
≥82
Beam Angle
40°
Lumen
Warm white - 300lm /// Cool white - 330lm
Installation Location
Indoor only
Hole Cut Out
W 47mm x D 42mm x H 67mm
Size (mm)
W 65mm x H 82mm
Warranty Period
3 year replacement warranty
How Does Ripple Control Affect LED Lights?
A flickering LED light is the most common complaint arising from ripple control, which is generated when usually but not only when the light is dimmed and the ripple control frequency is in the line, usually between 300Hz and 1300Hz.
The Flickr is often, but not always, intermittent depending on when the ripple control signals are being transmitted. It is normally at certain times i.e. 6 pm and then again at 8:30 pm and will only last for 30 seconds to 2 minutes, and when the power company stops sending the signal the flicker stops.
People often notice it most acutely in the night when off-peak hot water systems are turned on. ALL brands of LED drivers are affected by these ripple control signals.
Why Doesn’t Martec have Ripple Control Filters in their LED Drivers?
Ripple control is not the norm and in many environments. While Martec does sympathise with the few customers who do experience a problem, it is not cost effective to build an Electronic Driver that rejects all ripple control frequencies given the small proportion of people affected, a cost that would have to ultimately be borne by all customers.
